B Yours Plus Thrill N' Drill 9" Dildo Clear Suction Cup Base

What it is

The B Yours Plus+ Thrill n' Drill is a clear, single-piece dildo from Blush, measuring 9.5 inches overall with 8.5 inches insertable and a 2 inch width. It is formed as one solid piece, from a sculpted head down a gently veined shaft to a wide, flat suction cup base. There are no batteries, no charging port and no separate attachments — it is a single length of transparent material that arrives on a printed backing card inside a clear blister pack.

B Yours Plus+ is the softer tier of Blush's long-running B Yours range, and this listing is the transparent Thrill n' Drill shape in the 9 inch size. You can see the rest of the range in our dildo collection, alongside the wider sex toys catalog.

Shape, size and finish

The shaft is a smooth, straight column with a subtle vein relief and a defined ridge under the head, rather than a ribbed or spiraled surface. The head is the widest point, and the manufacturer's dimension diagram marks the 2 inch width across it. Below the ridge the shaft runs slightly narrower and stays close to even for most of its length, then narrows sharply in the last inch before it meets the base.

The base is a broad, thin suction disc, and it serves two purposes. Pressed onto a smooth, non-porous surface — tile, a mirror, a sealed floor, the side of a bath — it holds the piece upright for hands-free use. Off a surface, the same disc works as a flared anchor that seats inside the O-ring of most standard strap-on harnesses, which is why the packaging lists the piece as harness compatible.

The material is fully transparent rather than tinted, so light passes straight through the shaft and the internal molding lines are visible. The packaging describes the feel as soft and realistic.

How to use it

Wash the piece before the first use and apply a water-based lubricant generously along the shaft. Water-based lubricant is the right default here: it is compatible with the widest range of body-safe molded materials, it does not degrade the suction disc, and it rinses off without residue.

For hands-free use, choose a smooth, non-porous, genuinely flat surface and clean it first — suction fails on dust, grout lines, textured tile and anything with a gloss-free finish. Press the disc down firmly and hold it for a few seconds to expel the air beneath it, then test the hold with a gentle pull before putting weight on it. To release, lift one edge of the disc to break the seal rather than pulling the shaft, which is what tears a suction base over time.

For harness use, seat the base through the O-ring from behind so the disc sits flat against the harness panel. A 2 inch width needs a correspondingly sized O-ring; check your harness ring diameter before use. Go slowly, add more lubricant than you think you need, and stop if anything is uncomfortable.

Care and cleaning

Wash with warm water and a mild unscented soap, or a dedicated toy cleaner, after every use. Pay particular attention to the ridge under the head and the underside of the suction disc, where lubricant collects. Rinse thoroughly, then let the piece air dry completely on a clean towel before storing it.

Store it on its own in a dust-free bag or a lined box rather than loose in a drawer pressed against other items. Keep it out of direct sunlight and away from heat sources. Do not put it through a dishwasher, boil it, or clean it with alcohol, bleach or any solvent-based cleaner — the manufacturer does not publish a material grade or a heat rating for this piece on the packaging, so those methods fall outside what the maker has specified.

Who it's for

This is a full-size piece aimed at adults who already know they want length and a 2 inch width. At 8.5 inches insertable it sits well above entry-level sizing, so it suits experienced users rather than someone buying a first dildo. The transparent finish appeals to people who like a clean, non-flesh-toned look, and the suction base makes it a practical choice for solo hands-free use, shower and bath play, or partnered strap-on play with a compatible harness.

If the 2 inch width is more than you want, the same B Yours family is made in narrower shapes and shorter lengths — worth comparing before you commit.

Good to know

• For adults 18 and over only.
• Use a water-based lubricant. Do not use household oils, lotions or petroleum-based products on a molded novelty.
• Never leave the piece inserted unattended, and do not use it anally without a base that stays outside the body — the flared suction disc on this model is designed to do exactly that.
• Stop use if you notice any tackiness, surface change, splitting or odor, and replace the item. Do not attempt to repair or reseal a molded piece.
• This is a novelty item, not a medical device, and it is not sterile out of the pack.
• California residents: no Prop 65 warning is printed on this product's packaging. General background on the program is available from the California Prop 65 warnings site (OEHHA), and the state's Prop 65 chemical fact sheets cover individual substances.

Frequently Asked Questions

What are the exact dimensions of the B Yours Plus+ Thrill n' Drill?

It measures 9.5 inches in overall length, 8.5 inches insertable, and 2 inches in width. Those three figures come from the manufacturer's own dimension diagram for this model. The 8.5 inch insertable figure is the number to plan around, since the remaining inch is the suction cup base that stays outside the body.

Is this dildo compatible with a strap-on harness?

Yes — the packaging lists it as harness compatible, and the flat suction disc doubles as the flared anchor that seats inside a harness O-ring. Because the piece measures 2 inches at its widest, check that your harness ring is cut wide enough to pass the shaft before you buy. Standard interchangeable-ring harnesses usually ship with several ring sizes for this reason.

What is this piece made of?

The packaging states that it is body safe and phthalate free, and that it is free of fragrance and paraffin. Blush does not print a specific material name or grade on this card, so the printed statements above are the full extent of what the manufacturer specifies for this model. Wash it with warm water and mild soap and store it separately from other items.

Which lubricant should I use with it?

Use a water-based lubricant. It is compatible with the widest range of molded body-safe materials, it will not attack the suction disc, and it rinses away cleanly with warm water and soap. Apply more than feels necessary at a 2 inch width, and reapply during use rather than pushing through a dry patch.

Will the suction cup hold on any surface?

No — it holds on smooth, clean, non-porous surfaces only. Glazed tile, glass, a mirror, an acrylic bath panel and sealed hardwood all work; grouted tile, textured plastic, painted drywall, fabric and anything dusty will not hold. Wipe the surface first, press the disc down hard to push the air out, and test the grip with a pull before you rely on it.

How will this arrive in the mail?

It ships in plain, unmarked outer packaging with no indication of the contents on the outside. It will not show the Gear Isle name.

Product information compiled and reviewed by the Gear Isle product team. We transcribe product specifications directly from manufacturer packaging. Found an error? Tell us.

These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease. Adult novelty device for adults 18 and over. Consult a licensed healthcare professional before use, especially if you have a medical condition. Keep out of reach of children.