Joe Snyder Maxibulge Bikini MXB-01 Style

What the Joe Snyder Maxibulge Bikini MXB-01 is

The Maxibulge Bikini MXB-01 is a men's bikini brief from Joe Snyder, cut low on the hip with a shaped front pouch panel, high-cut leg openings and partial coverage across the seat. It is a single-style garment in a fine stretch knit, shown here in two colorways: a purple with a bright metallic sheen and a yellow in a flat matte finish. Within the store it sits in the men's underwear range rather than with outerwear.

How it is cut and put together

The front is built from a shaped pouch panel joined to the body of the brief by a seam on each side, so the pouch is formed by its own piece of cloth rather than cut continuous with the rest of the garment. The waistband is narrow and made from the same knit as the body, which keeps the top edge low and soft against the hip. A small square patch sits on the waistband at the front left, carrying a stitched emblem.

From the side the brief rises to a narrow seam at the hip, and the leg opening is cut high so the line runs up toward the hip bone rather than straight across the top of the thigh. The back is a bikini cut: the seat is partly covered rather than fully, and a seam runs down the center of the back panel, gathering the knit into soft vertical ruching that lets the panel follow the shape underneath it.

Product specifications

The two colorways are two different fabric finishes

The purple and the yellow are not simply the same cloth in two dyes. The purple knit has a wet-look, metallic surface that throws a hard specular highlight wherever the fabric curves, so the seams and the gathered center back read as bright lines and the pouch picks up a lit edge along its side seam. The yellow is a flat, even matte that absorbs studio light instead of bouncing it, so the same seams register only as a slight change in level. If you want the construction lines of the garment to show, the purple does that; if you want it to read as one unbroken block of color, the yellow does.

Looking after it

Hand wash this brief in cold water with a mild detergent, do not bleach it, and line dry it away from direct heat. That is the conservative routine for any fine stretch knit and for a metallic-finish fabric in particular: hot water and tumble drying are what take the spring out of a stretch knit over time, and heat is also what dulls a wet-look surface. Washing it inside out keeps the shiny face of the cloth away from abrasion in the basin. Keep an iron away from the metallic colorway.

Who it is for

This is a men's brief for adults 18 and over who already know they prefer a bikini cut — low on the hip, high on the leg, with the seat partly rather than fully covered. It is a more revealing cut than a trunk or a boxer brief and a more covered one than a thong or a jockstrap. Of the two colorways, the yellow is the quieter: a metallic finish is a deliberately showy fabric and the purple is meant to be noticed as such. Browse the rest of our clothing and the wider men's range if you want to compare cuts side by side.

Good to know

• For adults 18 and over. Keep away from children.
• Stop wearing it and seek advice from a licensed healthcare professional if the fabric or the seams irritate your skin.
• Fine stretch knits snag on rough nails, jewelry and hook-and-loop fastenings. Store it folded rather than crushed under heavier garments.
• Wash a strong color such as the purple separately the first time, as any deep dye can transfer when it is new.

Frequently Asked Questions

What cut is the Maxibulge Bikini MXB-01?

It is a men's bikini brief: a low rise that sits below the hip bone, a high-cut leg opening, a shaped front pouch panel seamed at both sides, and partial coverage across the seat with a gathered seam down the center back. That places it between a trunk, which covers the top of the thigh, and a thong or jockstrap, which cover almost none of the seat.

What is the difference between the purple and the yellow?

The fabric finish. The purple is a wet-look metallic knit that reflects light sharply and shows every seam as a bright line; the yellow is a flat matte knit that reflects very little. The cut, the seaming and the construction are the same in both.

How much does the back cover?

Partly. The back panel covers the central portion of the seat and leaves the outer sides open, with a seam down the middle that gathers the knit into soft vertical folds so the panel follows the shape underneath rather than sitting flat across it.

How should I wash it?

Hand wash in cold water with a mild detergent, do not bleach, and line dry away from direct heat. Turning it inside out first protects the face of the fabric, and keeping it out of a tumble dryer is what stops a knit like this one from going slack.

How is the order packaged?

Your order ships in plain outer packaging with no product imagery and nothing on the outside describing the contents. It will not show the Gear Isle name.

Product information compiled and reviewed by the Gear Isle product team. We transcribe product specifications directly from manufacturer packaging. Found an error? Tell us.

These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease. Adult novelty device for adults 18 and over. Consult a licensed healthcare professional before use, especially if you have a medical condition. Keep out of reach of children.