Shots Toys Pumped Automatic Luv Penis Pump Transparent AA Batteries

What it is

The PUMPED by Shots Automatic Luv Pump in transparent is a push-button vacuum cylinder made of ABS and silicone. It measures 29 cm (11.4 in) from end to end, and the carton also holds a separate silicone ring. The whole cylinder is clear, from the soft sleeve at the open end up to a white control housing at the closed end, which carries two buttons and the PUMPED diamond logo. It is an automatic unit: you press a button instead of squeezing a bulb or working a lever, and your hand only has to hold the tube.

This is the clear colourway of the Automatic Luv model in the PUMPED range. It sits alongside the other cylinders in our penis pumps collection, where you can compare it with manual hand-pump and pistol-grip designs.

How the cylinder is built

A labelled parts diagram from the manufacturer names six components, and each one can be seen in the product photographs:

1. Silicone sleeve: the ring-shaped cushion that fits over the open end of the tube.
2. Transparent tube: the main clear body of the cylinder. The key spells it "transparant", which is the maker's spelling.
3. Measuring point: a marked reference point partway along the tube.
4. On/Off button: the upper button on the housing, marked with the standard power symbol.
5. Quick release button: the lower button, marked with a different icon so you can tell the two apart by eye.
6. Silicone ring: a separate black band that comes in the carton.

A fine halftone dot pattern is printed around the top of the tube, just below the housing. It fades out as it runs toward the open end, so the lower part of the cylinder stays completely clear. In the angled product shots a thin red arc shows through the dot pattern. A narrow dark band marks the joint where the tube meets the white housing.

The sleeve and the open end

The silicone sleeve is the part of this pump you will handle most. In the product photographs it is a frosted, milky-white collar that fits over the rim of the tube. Its outer face is flat, with a round opening in the centre. One angled shot shows the tube with no sleeve fitted, and there the rim is a plain, clear edge. Seen together, the two shots show that the sleeve sits on the end of the tube as a separate piece, so you can take it off for cleaning. The sleeve being silicone and the body being ABS is confirmed by the carton front, which prints exactly two materials: ABS and silicone.

Controls

There are two controls, both on the front of the rounded housing and both within reach of the thumb of the hand holding the tube. The on/off button starts and stops the pump. The quick release button is the one the manufacturer's key names separately. Its icon is different from the power symbol, so you can find it by sight rather than by memory. The in-hand photograph shows the cylinder held around the tube, with the housing and both buttons toward the fingertips.

The carton and the photographs do not show a gauge, a speed dial or a display. Two buttons are all the unit has.

What comes in the carton

• One Automatic Luv Pump cylinder in the transparent finish, with its white control housing.
• One silicone sleeve, shown fitted to the open end of the tube.
• One separate silicone ring, black, shown on the carton front and in the parts key.

How to use it

Read the instructions that come in the carton before your first session, and follow them over anything you read online, this page included. The manufacturer's "How it works" diagram shows the basic sequence in three frames. First the cylinder is placed with the ring sitting at its base. Then air is drawn out of the tube. Last, the cylinder comes away and the ring stays in place. On this model the drawing-out step is automatic, and the quick release button is there for when you want to stop.

A few practical points follow from how the unit is built:

• Fit the sleeve squarely onto the rim before you start. A sleeve that sits crooked will not seal evenly.
• Keep your thumb near the quick release button for the whole session, not just at the end.
• Go gently at first. Stop straight away if anything feels painful or numb, or looks discoloured.
• The included ring is a close-fitting wearable. Follow the printed guidance on how long to wear it, and take it off at once if it becomes uncomfortable.

Care and storage

The sleeve is the part that touches skin, so clean it after every session. Unless the enclosed instructions say otherwise, take it off the tube, wash it in warm water with a mild soap, rinse it well and let it air-dry before you refit it. Wipe the clear tube inside and out. The carton does not print a water-resistance rating, so keep water away from the white housing and its buttons. Store the cylinder dry, with the sleeve and ring alongside it, out of direct sunlight.

Who it's for

The Automatic Luv Pump suits adults 18 and over who want a vacuum cylinder they run with a button rather than by hand. It also suits anyone who has found a manual bulb tiring to operate. The transparent finish keeps the whole tube see-through apart from the dotted band at the top. For rings and other accessories to go with it, browse our men's adult products range.

Good to know

The carton names the materials as ABS and silicone. If you want general background on how California's chemical warning labels work for consumer products, the California Prop 65 warnings site (OEHHA) explains the scheme, and the Prop 65 chemical fact sheets (OEHHA) describe individual substances. Those pages cover the terms in general and say nothing about this particular product. Talk to a healthcare professional before using any vacuum device if you have a medical condition or take regular medication.

Frequently Asked Questions

What is included with the PUMPED Automatic Luv Pump in transparent?

You get the transparent cylinder with its white push-button housing, the silicone sleeve for the open end and a separate black silicone ring. The manufacturer's parts key lists all three, and the carton front shows the ring beside the pump.

How long is the Automatic Luv Pump?

The cylinder measures 29 cm (11.4 in) overall, according to the manufacturer's size card. That figure covers the whole unit, including the control housing, not just the part of the tube you look through.

What powers the Automatic Luv Pump?

It runs on batteries, and the listing names AA batteries. We could not confirm the number of cells, or whether any come in the carton, from the packaging photographs. Keep a set of fresh AA batteries ready and check the specification panel on the back of the carton when it arrives.

What is the inner diameter of the tube?

We have not published an inner diameter, because we could not confirm one from the packaging photographs. We would rather leave the figure out than give you a number we have not checked. If the diameter decides whether you buy, ask us and we will look at a unit for you.

How is my order packaged?

Your order ships in plain outer packaging with no product images or brand marks on the outside. It will not show the Gear Isle name.

Product information compiled and reviewed by the Gear Isle product team. We transcribe product specifications directly from manufacturer packaging. Found an error? Tell us.

These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease. Adult novelty device for adults 18 and over. Consult a licensed healthcare professional before use, especially if you have a medical condition. Keep out of reach of children.