What it is
The Oxballs Invader Clear Ice is an open-ended cocksheath molded in a frosted, near-transparent material that the packaging identifies as PLUS+SILICONE, printed on the card itself as a TPR and silicone blend. It is a one-piece sleeve, open at both ends, with a rippled outer wall and a separate loop at the base. One sheath is supplied, in the Clear Ice color, on the brand's hang-tab card.
Oxballs packaging carries a bull roundel and the line "Shockingly Superior". The Invader sits in the brand's sheath range rather than its ring range, and you will find it alongside the rest of the category in Penis Extensions. It is an unpowered accessory — no batteries, no motor, no charging port.
The material and how it is built
The card names the material as a TPR and silicone blend, sold under the brand's PLUS+SILICONE badge. That is worth reading precisely: it is a blend, not a pure platinum silicone, and the two behave differently in the hand and in the sink. A blend of this kind is noticeably softer and slacker than a solid silicone ring, stretches a long way without feeling like it is fighting you, and takes a slightly tacky, rubbery surface rather than a dry polished one.
The Clear Ice finish is the version of the Invader that shows its own construction. Because the wall is translucent rather than opaque, the shape of the inner channel reads straight through it, and the rounded swells that form the outer ripples show as pale shadows from the inside as well as raised forms on the outside. Light passes through the thin sections at the openings and stops in the thick sections through the middle, which is why the sleeve looks close to white at its widest point and nearly clear at its ends. The molded INVADER wordmark on the side wall behaves the same way — on an opaque color it would read by cast shadow, but here it is a faint relief you catch at an angle.
The outer profile is graduated. The swells are deepest through the middle of the sleeve and taper down toward each opening, so the silhouette is widest at its waist. Both ends are open, which is what separates a sheath like this from a closed-tip extension. Below the main body sits a separate D-shaped loop, molded in one piece with the sleeve.
Product Specifications — Oxballs Invader Clear Ice Silicone Open Ended Cocksheath
| Feature / Property | Details |
|---|
| Brand | Oxballs |
|---|
| Model | Invader |
|---|
| Category | Open-ended cocksheath |
|---|
| Material | PLUS+SILICONE — printed on the card as a TPR and silicone blend |
|---|
| Color | Clear Ice — frosted, translucent |
|---|
| Construction | One piece; open at both ends; separate loop at the base |
|---|
| Outer surface | Graduated rounded ripples, deepest through the middle |
|---|
| Branding | INVADER molded into the side wall |
|---|
| Power | None — unpowered accessory |
|---|
| Quantity | One sheath |
|---|
| Packaging | Hang-tab card, package front shows the sheath |
|---|
Oxballs does not print dimensions, a weight or a country of manufacture on the face of this card, so none are listed above. Where a figure is not printed, it is left out rather than estimated.
How to use it
Apply a generous amount of lubricant to the inside of the sleeve before putting it on, because a stretchy blend like this one grips a dry surface and slides on a wet one. Roll or ease the sleeve on rather than tugging at a single point of the rim — spreading the stretch around the opening is what keeps a soft material from creasing. The base loop is there to be used; passing it into position anchors the sheath so it is not relying on the sleeve alone to stay put.
A water-based lubricant is the straightforward choice here. Silicone lubricants can interact with silicone-bearing surfaces over repeated use and leave them tacky, so water-based is the safer default with this blend, and it rinses off without residue. Reapply as you go instead of starting with more than you need.
Cleaning and storage
Wash the sheath in warm water with a mild, unscented soap, working it through the inside as well as over the ripples, then rinse it thoroughly and let it air-dry completely before it goes away. The inside of an open tube dries quickly if you stand it on end.
Do not boil this one, do not put it in a dishwasher and do not reach for bleach or alcohol. Those instructions circulate for pure platinum silicone, and this card names a blend — heat and solvents are what degrade a TPR-bearing surface and turn it sticky. Store it dry, out of direct sunlight, and not pressed up against other soft toys, which can mark each other over time.
Who it is for
This is an adult novelty for people who want a soft, textured sleeve rather than a rigid one, and it suits partner use and solo use equally. The open-ended format is the practical distinction to weigh: it leaves both ends clear, which some people prefer and others do not, and it is the reason to choose this over a closed-tip extension. More of the brand's range for men is gathered under Men.
It is for adults 18 and over. If you have a known sensitivity to rubber or thermoplastic materials, this is not the blend for you — the card names TPR, and that is the part to check against your own history before buying.
Good to know
Because this is a molded consumer product rather than a food or supplement, the chemical-warning framework that applies to it in California is Proposition 65. The packaging names a TPR and silicone blend and makes no other chemical statement. If you want independent background on how those warnings work and what the terms mean, the state publishes California Prop 65 warnings (OEHHA) and a library of Prop 65 chemical fact sheets (OEHHA). Neither page says anything about this product, and neither is an endorsement of it.
Keep it away from children. Stop using it if it causes discomfort or if the surface becomes damaged, and do not force it into position.
Frequently Asked Questions
What is the Oxballs Invader Clear Ice made of?
It is made of a TPR and silicone blend, which Oxballs sells under its PLUS+SILICONE badge and prints in those words on the card. That is a blend rather than a pure platinum silicone, which matters for cleaning: a blend should be washed in warm soapy water, not boiled.
Is the Invader open at both ends?
Yes — it is an open-ended sheath, so the tube is clear through from one opening to the other. That is what distinguishes it from a closed-tip extension sleeve, where one end is sealed.
What is the loop at the base for?
The loop is a separate opening molded in one piece with the sleeve, and it anchors the sheath at the base so the sleeve is not doing all the work of staying in place. It is part of the casting, not a detachable strap.
Which lubricant should I use with it?
Use a water-based lubricant. Silicone lubricants can leave silicone-bearing surfaces tacky after repeated contact, and water-based rinses away cleanly, which suits a textured sleeve with an inside surface to wash.
How will my order be packaged?
Orders ship in plain outer packaging with no product imagery and nothing on the outside describing the contents. It will not show the Gear Isle name.
Product information compiled and reviewed by the Gear Isle product team. We transcribe product specifications directly from manufacturer packaging. Found an error? Tell us.
These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease. Adult novelty device for adults 18 and over. Consult a licensed healthcare professional before use, especially if you have a medical condition. Keep out of reach of children.
