Performance VX101 Male Enhancement Penis Pump Stay Hard Cock Ring

What the Performance VX101 is

The Performance VX101 is a manual, hand-operated vacuum pump kit for adults, supplied as three separate pieces: a smoke-tinted cylinder measuring 9.5 inches overall with an 8 inch chamber, a flexible ribbed air tube ending in a soft squeeze ball pump, and one clear ring. The carton calls it a "Male Enhancement System" and marks the model as VX101. Nothing here runs on batteries or mains power — the vacuum is produced entirely by squeezing the ball by hand, which is what puts the rate and the level of suction under your own control at every moment.

Everything stated on this page is transcribed from the printing on the carton and from the manufacturer's own specification panels supplied with this listing. Where the packaging does not print something — a material name, a session length, a country of origin — this page says so plainly instead of filling the gap.

The three pieces, and what each one does

The kit is deliberately simple, and each part is worth looking at on its own.

• The cylinder. A rigid, smoke-tinted tube, translucent rather than opaque, with a domed top that narrows to a knurled threaded connector. Its wall carries a graduated scale in the surface of the plastic itself rather than as a printed sticker or a wrap. There are two scales, one numbered up to 7 and a finer one numbered up to 20, each with minor tick marks between the numerals; because the tube is translucent, both stay readable against what is inside it. The open end is finished with a black screw-collar that seats a separate soft seal ring inside it, and the feature panel lists that piece as a removable sleeve.
• The air tube and ball pump. A black concertina-ribbed hose, listed on the panel as a flexible air tube, joins the top of the cylinder to a hand-held squeeze ball. The hose is corrugated along its whole length, which is why it holds a bend instead of folding shut, and it connects at both ends through knurled screw fittings. The ball itself is moulded with a deep diamond lattice across its widest part, so it stays put in the hand when fingers are wet or slippery. An inline black housing sits between the hose and the ball, carrying a raised push button: the panel names this the quick release valve, and the carton front repeats it as one of the four features it chooses to advertise on the pack.
• The ring. One clear, frosted, smooth-profile ring is included — the starburst on the carton front confirms a single ring in the kit. It is a plain round doughnut section with no ridges, nubs or seams, and the specification panel gives it as 1.3 inches across, 0.35 inches thick, stretching to a maximum of 4.5 inches. The panel's own wording for it is "strong & stretchy".

Measurements as printed

Every figure below is taken from the manufacturer's dimension graphic, which is one of the images on this listing. No figure has been rounded, converted or inferred.

Materials, as far as the packaging states them

The feature panel makes exactly one material declaration: latex and phthalate free. It does not name the polymer the cylinder is moulded from, nor the material of the sleeve, the hose, the ball or the ring, and no photographed surface of the carton names them either. This page therefore does not name them. That is a deliberate omission rather than an oversight — a material name is the sort of detail a buyer with a sensitivity relies on, and quoting one that is not printed anywhere would be worth less than saying nothing at all.

What can be described honestly is the finish. The cylinder is translucent smoke grey and rigid enough to hold its shape under hand pressure. The base collar and the hose fittings are matte black. The ball is a softer moulding with a textured grip, and the ring is frosted clear with a smooth, unbroken surface. The full material breakdown, along with the manufacturer's own care and use instructions, is on the printed matter supplied inside the carton.

Handling, care and storage

No timings, session limits or step-by-step instructions are printed on any photographed surface of this packaging, so this page does not invent any. Follow the printed instructions supplied in the carton, and read them before first use rather than during it.

In general terms: the kit comes apart at the knurled screw fittings at each end of the hose, and the sleeve is listed as removable, which is the point of designing it that way — the surfaces that need attention are the ones that separate. Warm water and a mild, unperfumed soap suit hard plastic and soft mouldings alike, and every piece should dry fully before it goes back together, since trapped moisture is the usual reason a stored device develops a smell. Keep the inside of the ball pump out of standing water. Store the pieces somewhere cool and dry and out of direct sunlight, and keep it as a single-person item rather than something shared.

The manual design helps here too. Because you are creating the vacuum by hand, you can stop at any point, and the quick release valve on the inline housing is there to let the pressure off without pulling anything.

Who it suits

This is an entry-level kit rather than a specialist one, and it suits an adult who wants a straightforward manual device with no electronics to charge, pair or replace. The graduated scale on the cylinder wall makes it easy to see what is happening inside, which is the practical argument for a translucent tube over an opaque one. The included ring makes it a two-item purchase in one carton rather than two separate ones.

It is sold for adults aged 18 and over. It is not a medical device, it is not sold as one, and it is not a substitute for advice from a qualified clinician. If you have a circulatory condition, a bleeding disorder, diabetes, take blood-thinning medication, or have any doubt at all about whether a vacuum or constricting device is appropriate for you, speak to a healthcare professional before buying rather than after. If you want to compare formats first, the full penis pumps range and the separate cock rings category are both worth a look.

Good to know

• Sold for adults 18 and over. Keep out of reach of children.
• Stop immediately if anything is uncomfortable, and release the vacuum using the quick release valve rather than by pulling.
• The manufacturer's printed instructions supplied with the kit are the authority on use, session length and care. This page does not restate figures that are not printed on the packaging.
• The packaging declares the kit latex and phthalate free. No other material declaration is printed.
• No country of manufacture, no batch or lot code and no date code appears on any photographed surface of the carton.
• Not a medical device. Consult a healthcare professional if you have any relevant medical condition or take prescription medication.

Frequently asked questions

What exactly comes in the carton?

Three pieces come in the Performance VX101 carton: the 9.5 inch smoke-tinted cylinder with its base collar and seal sleeve, the flexible ribbed air tube with the squeeze ball pump and inline quick release valve attached, and one clear ring. The carton front carries a starburst confirming a single ring is included. Printed instructions are supplied with the kit.

Is this pump powered or manual?

It is fully manual. Suction is generated by squeezing the soft ball pump by hand, and there is no motor, battery compartment, charging port or cable anywhere on the unit. That means nothing to recharge before use and nothing to fail electrically later, and it keeps the pace and the amount of suction under the user's direct control throughout.

What are the cylinder's measurements?

The cylinder is printed as 9.5 inches overall with an 8 inch chamber and a width of 2.25 inches measured at the base collar. Those three figures come from the manufacturer's dimension graphic, which is included among the images on this listing so you can read them for yourself. The scales on the cylinder wall are numbered up to 7 on one and up to 20 on the other.

What is the cylinder made from?

The packaging does not say, and neither does this page. The only material statement printed anywhere on the photographed surfaces of this pack is that the kit is latex and phthalate free; no polymer, resin or rubber is named for the cylinder, the sleeve, the hose, the ball or the ring. If you need the full material breakdown before you buy — for a sensitivity, for example — the printed matter inside the carton carries the manufacturer's own specification, and you are welcome to ask our team to check a specific point first.

Can the sleeve be taken out?

Yes. The feature panel on the packaging lists a removable sleeve, and the soft seal ring is visibly a separate piece seated inside the black base collar rather than part of the tube itself. Taking it out is what makes both the sleeve and the inside of the collar reachable for cleaning. The manufacturer's printed instructions cover how it comes out and goes back.

How long should a session be?

No session length, frequency or pressure figure is printed on any photographed surface of this packaging, so no number is quoted on this page. The instructions supplied in the carton are the correct source for that, and they should be read first. As general good practice with any vacuum or constricting product, stop at once if there is discomfort, numbness, tingling or any change in colour, and speak to a healthcare professional if you are unsure whether this kind of device suits you.

Product information compiled and reviewed by the Gear Isle product team. We transcribe product specifications directly from manufacturer packaging. Found an error? Tell us.

These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease. Adult novelty device for adults 18 and over. Consult a licensed healthcare professional before use, especially if you have a medical condition. Keep out of reach of children.